90EF-1488B4-2432 – End Fittings – 90º – Flange to Hose (MIL-DTL-24787/1, Type FL, Group VIII, Class V, 150 Lb. Flange per A.N.S.I. B16.5)
90EF-1488B4-2432

90EF-1488B4-2432 – End Fittings – 90º – Flange to Hose (MIL-DTL-24787/1, Type FL, Group VIII, Class V, 150 Lb. Flange per A.N.S.I. B16.5)

( MIL-DTL-24787/1, Type FL, Group VIII, Class V, 150lb. Flange per A.N.S.I. B16.5 )

Description:

Use with the following hose: Synthetic yarn and wire reinforced hoses i.a.w. MIL-DTL-24136/3, MIL-DTL-24135/10/12, e.g. HS P/N 2580

Specification

  • Applicable Hoses: Synthetic yarn and wire reinforced hoses in accordance with MIL-DTL-24136/3
  • Component 1: Required per Assembly – 1 Description – Elbow Assembly Material – Monel/Cuni C19100
  • Component 2: Required per Assembly – 1 Description – Socket C18662 Material – Monel in accordance with QQ-N-281
  • Component 3: Required per Assembly – 1 Description – Flange C18797 Material – Aluminum Bronze in accordance with ASTM B505 C95400
  • H: 3.74''
  • J: 5.00''
  • L: 3.88''
  • M: 0.62''
  • N: 0.42''
  • R: 2.50''
  • A: 5.68''
  • C: 2.44''
  • D: 3.84''
  • G: 2.25''
  • Est. Wt. (lbs.): 5.4
  • Hydrasearch Drawing Number: C19576
  • IPS Size: 1-1/2''
  • Mil Spec: MIL-DTL-24787/1
  • No. of Bolt Holes: 4

Specification Table

Applicable HosesSynthetic yarn and wire reinforced hoses in accordance with MIL-DTL-24136/3
Component 1Required per Assembly – 1 Description – Elbow Assembly Material – Monel/Cuni C19100
Component 2Required per Assembly – 1 Description – Socket C18662 Material – Monel in accordance with QQ-N-281
Component 3Required per Assembly – 1 Description – Flange C18797 Material – Aluminum Bronze in accordance with ASTM B505 C95400
H3.74''
J5.00''
L3.88''
M0.62''
N0.42''
R2.50''
A5.68''
C2.44''
D3.84''
G2.25''
Est. Wt. (lbs.)5.4
Hydrasearch Drawing NumberC19576
IPS Size1-1/2''
Mil SpecMIL-DTL-24787/1
No. of Bolt Holes4

Specification Image

90EF-1488B4-2432 – End Fittings – 90º – Flange to Hose (MIL-DTL-24787/1, Type FL, Group VIII, Class V, 150 Lb. Flange per A.N.S.I. B16.5) specification drawing